Concepts to understand: What is the Group Policy? x 81 Anonymous In my case, the 1030 & 1058 event were fixed by: 1) Change the binding order of the network adapters (ncpa.cpl-advanced-advanced settings), so that the adapter that is See ME913463 for a hotfix applicable to Microsoft Windows Server 2003. After allowing it, the problem was gone. http://rinfix.com/windows-cannot/userenv-windows-cannot-determine.html
Group Policy processing aborted. " We had joined two domains a few months ago. The Local Admin account had been disabled. The server lost connection to the DC and all accounts in the admin group showed just as their SIDs. After going through many steps listed here, the web, and elsewhere (i.e.
Get the answer ksiembMay 15, 2012, 4:34 AM thatguy0130 said: I repaired the copy of Windows XP (I didn't not realize I would need my key again, luckily I was able Intermittently, gpupdate was working and logging event 1704 from SceCli showing it was working. It came along with event id 1058. I fixed the problem by running DCGPOFIX on the Win2k3 server followed by a reboot.
The information in the 529 event contained the reason "Unknown user name or bad password", a logon type of 3, and the logon process and authentication process set to Kerberos. Therefore, Group Policy replication in the Active Directory directory service will fail, and you will not be able to edit Group Policy to undo these settings". x 77 Guido Holly In our case, the Firewall blocked the communication from our Terminal Server to the domain controller on port TCP 1026. Kb885887 x 4 Anonymous We got this error every 5 minutes after we changed the DNS entry for the server.
Is there any way to fix this problem? TekSavvy - ENOUGH IS ENOUGH ALREADY!!! [TekSavvy] by MrMazda86423. Type MaxPacketSize, and then press ENTER. 5. You can use the links in the Support area to determine whether any additional information might be available elsewhere.
It was a domain controller that that had been restored from an image for testing purposes. Dfsutil /purgemupcache It cleans up registry entries for any and all installations uni-nstallations that may have left erroneous entries, that could cause future problems when installing uninstalling anything. x 4 Martin Latteier - Error: "The specified domain either does not exist or could not be contacted" - In my case, switching the network interface duplex mode from "auto sensing" I disabled lmhost and netbui over tcp/ip." Error: "The specified domain either does not exist or could not be contacted" (Error code 1355) - From a newsgroup post: "Make sure that
Resetting the disconnected session cleared the issue. And yes, you could cause serious error if deleting the wrong entries. Windows Cannot Access The File Gpt.ini For Gpo x 128 Anonymous This happened on two different Win XP Pro SP3 computers. Windows Cannot Access The File Gpt.ini For Gpo 1058 The DC had Event Id 529 logged after it's reboot.
Running nslookup showed me the extra invalid record for the domain. have a peek at these guys As per Microsoft: "This behavior occurs if the SMB signing settings for the Workstation service and for the Server service contradict each other. x 80 Anonymous I had the same problem a few weeks ago. Login here! Windows Cannot Access The File Gpt.ini For Gpo Cn= 31b2f340-016d-11d2-945f-00c04fb984f9
You should not have the entry with the failure. x 6 Thomas Wurm Jr. In addition, the procedure clears the network configuration, so I recommend doing an "ipconfig /all > ipconfig.txt" to record the network settings in a text file somewhere before starting, so that check over here See ME935918, WITP79913 and WITP81903 for additional information about this event.
Renaming it solved the problem and the event no longer occurred. Kb840669 Any assistance would be greatly appreciated! 6 answers Last reply May 15, 2012 More about event viewer application error userenv ksiembMay 14, 2012, 2:58 PM thatguy0130 said: I noticed while troubleshooting At that point, we received events 1030 and 1058 every 4 or 5 minutes.The solution was to delete the SBS policies leaving only the DEFAULT DOMAIN POLICY.
Mark Minasi's support forums - see EV100039), a co-worker decided to change the network card to a new one, and Bingo.....problem solved. The seventh attempted log on was successful. Massachusetts question 4 passes, not happy [InTheNews] by IowaCowboy285. Windows Cannot Access The File Gpt.ini For Gpo Access Is Denied The OU looked and behaved normal otherwise.
Once I logged off the user using TS Manager, all was well. This is because the servers are trying to access the SYSVOL share as LocalSystem which by default does not have access to network resources. x 120 Rich Ailes I had this error crop up with a companion error in the system log: The Security System detected an authentication error for the server cifs/FQDNservername. this content I reinstalled it and all was OK (I had 1054 from Userenv and 40961 from LsaSrv error messages, too).
See ME325356. Check a box uncheck the same box and apply. Start Registry Editor. 2. Other posts from Microsoft engineer suggest that if a domain controller is multi-homed (more than 1 network card) they may experience this problem (note that "network card" could mean a physical
Right after the member server came into the domain, I received events 1058 and 1030 (Access denied) on all three servers. Perhaps there is something else I could try? Thank you for searching on this message; your search helps us identify those areas for which we need to provide more information. I restarted the netlogon service and this solved my problem.
x 4 Rikard Ståhl After applying the recommended security settings from Microsoft this event started to occur on the member servers running Windows 2003. The problem in our case was that the security settings were too hard. We created a "Team", two ethernet ports functioning as one, using the Intel PROSet software and Intel drivers. See ME948496 from Microsoft for more details on this issue.
See also ME555651 for more information. The problem seems to be related to the background group policy refresh failing if the user has locked the workstation. System – Full Control (inherited permissions and should be shown grayed out).