Home > Windows Cannot > Userenv Windows Cannot Determine The User Or Computer

Userenv Windows Cannot Determine The User Or Computer


x 4 EventID.Net From the newsgroup microsoft.public.windowsxp.basics, for the error "Not enough storage is available to complete this operation": "As per ME263693, you need to either install the hotfix or the I have resolved this problem by doing that. x 113 John Currie In my case it was the "Receive Side Window Scaling" issue that crops up with Windows Server 2003 SP2 & Broadcom NICs. I tried resetting both the domain and domain controller group policy settings as well as resetting the user rights to no avail. weblink

x 6 Thomas Wurm Jr. New 32x8 modem on the Approved List [ComcastXFINITY] by maxbrando249. I turned off"Receive Side Window Scaling" in the Broadcom settings to restore full functionality. doubt it helps but having fun!

http://www.eventid.net/display.asp?eventid=1053&source=Userenv&phase=1   2 Habanero OP pchiodo Sep 21, 2011 at 1:09 UTC What a riot BC - I was just on the

Windows Cannot Determine The User Or Computer Name Server 2003

The security had to be loosened. After trying other solutions, I was able to resolve the issue by removing the ''Client For Microsoft Networks'', rebooting, then adding the client back in, and rebooting again. x 4 Mike Pastore We received this event along with event 40960, 40961, and 1219 in the application log. Ad Choices ThemeWelcome · log in · join Show navigation Hide navigation HomeReviewsHowChartsLatestSpeed TestRun TestRun PingHistoryPreferencesResultsRun StreamsServersCountryToolsIntroFAQLine QualitySmoke PingTweak TestLine MonitorMonitor GroupsMy IP isWhoisCalculatorTool PointsNewsNews tip?ForumsAll ForumsHot TopicsGalleryInfoHardwareAll FAQsSite FAQDSL FAQCable

  1. Note that no Crash On Audit Fail blue screen appeared and the security event log was not full so there was no related message shown.
  2. Issue: Server lost network connectivity intermittenly , each time we have to reboot then it will be back to normal for few days Only clue we have is above error......in application
  3. This will occur if your DNS server is unable to resolve information about your domain.
  4. I know this may not be related to what i have been asking about but, the main concern was to make sure that authentication work.

If you are getting this error while trying to access network shares I would also recommend rejoining. When I put the server's switch port into portfast mode on my Cisco 6500 series switch, the issue was resolved". I did the server actually it this error is not related to article given. Event Id 1053 Error Code 1722 All rights reserved Use of this Site constitutes acceptance of our User Agreement (effective 3/21/12) and Privacy Policy (effective 3/21/12), and Ars Technica Addendum (effective 5/17/2012) Your California Privacy Rights The

Rename it, reboot. Windows Cannot Determine The User Or Computer Name Not Enough Storage x 131 Anonymous A simple reboot fixes the problem in my case, at least temporarily. Also look for fast retransmission as this would indicate loss as well. Use it!

Return value (1317)", on Windows 2000 servers, and event ID 1053 (Userenv) with message "Windows cannot determine the user or computer name. (The specified user does not exist). Event Id 1053 Group Policy Blatantly marking an answer without asking is the question answered? "So just look for any apps that's using port higher than 5000 or apps that using a lot of ports?" I A little more info please 0 Habanero OP B-C Sep 21, 2011 at 1:03 UTC where are you getting this error from? Thanks! · actions · 2006-Jan-30 8:03 am · mjn

mjn Premium Member 2006-Jan-30 6:04 pm Re: [2K3] Event ID: 1053: Windows cannot determine the userHmm..

Windows Cannot Determine The User Or Computer Name Not Enough Storage

x 4 Dale Smith In my case, a WinXP workstation logged events 40960 and 40961 from source LsaSrv as well as event 1053 from source UserEnv. Win98 lives -- now in your browser! [Microsoft] by aurgathor398. Windows Cannot Determine The User Or Computer Name Server 2003 Can you set up wireshark to record traffic from one or more of the systems with this error and see if you see anything out of the ordinary in your capture Windows Cannot Determine The User Or Computer Name Access Is Denied Finally, I found a computer that joined to the domain with a "_" character in the name.

You may get a better answer to your question by starting a new discussion. have a peek at these guys The information in the 529 event contained the reason "Unknown user name or bad password", a logon type of 3, and the logon process and authentication process set to Kerberos. If the problem persists, rejoin the domain with a slightly different computer name 0 Poblano OP Melman May 18, 2009 at 3:09 UTC Did that - no go Can you set up wireshark to record traffic from one or more of the systems with this error and see if you see anything out of the ordinary in your capture Windows Cannot Determine The User Or Computer Name 1326

I've rebuilt the DNS from scratch, making DC1 the primary, and DC2 the secondary, but it doesn't seem to make a difference. indeego Ars Tribunus Angusticlavius Tribus: I block ads, delete this account Registered: Jun 23, 1999Posts: 8241 Posted: Wed Oct 04, 2006 6:15 pm Firewall settings?Was firewall enabled while joining domain? I also tried gpupdate with the firewall switched off to no avail. http://rinfix.com/windows-cannot/userenv-windows-cannot-determine-the-user-or-computer-name-1053.html do i search for any apps that's using port higher than 5000?

x 128 Anonymous This happened on two different Win XP Pro SP3 computers. Windows Cannot Determine The User Or Computer Name The Rpc Server Is Unavailable No server updates have been done... Once I logged off the user using TS Manager, all was well.

that's a connection between two VLAN from 172.16.120.x to 172.16.190.x Any idea? 0 Habanero OP B-C Sep 22, 2011 at 11:26 UTC http://www.tomshardware.com/forum/19720-42-getting-checksum-errors-gigabit-ethernet-cards#t72984 what kind of NIC cards

It was a domain controller that that had been restored from an image for testing purposes. I was able to fix this issue when I realized that my "wkssvc.dll" file, which normally resides in "C:\WINDOWS\system32" got mysteriously deleted. Help Desk » Inventory » Monitor » Community » home| search| account| evlog| eventreader| it admin tasks| tcp/ip ports| documents | contributors| about us Event ID/Source search Event ID: Event Id 1053 Dhcp Is there any method we can capture or check which application is using most ports/resources ?

Spiceworks all depends on how often you set your scans for its monitoring to work as well... - but can do it too! 2 Mace OP Alex3031 Sep Add Cancel × Insert code Language Apache AppleScript Awk BASH Batchfile C C++ C# CSS ERB HTML Java JavaScript Lua ObjectiveC PHP Perl Text Powershell Python R Ruby Sass Scala SQL If ten years ago it was still common to see an entire company using just one server, these days that's no longer the case. this content I disabled lmhost and netbui over tcp/ip." Error: "The specified domain either does not exist or could not be contacted" (Error code 1355) - From a newsgroup post: "Make sure that

With the help of netstat -aon &netstat -anobcommands, you can get info of ports along with PIDs (Process IDs).I don't understand why you did not get any clue. Please ensure that you can contact the server that authenticated you" - I was receiving this error on a system in our environment. On one occasion this error led me to a problem in the DNS server as well but its best to start small and work your way up. 1 See WITP76098 for information on how to troubleshoot kernel-mode memory leaks.

An example of English, please! Comments are closed. After I enabled the account, the problem disappeared instantly. I tried 'gpupdate /force' and the eventid in the title appeared in the event log.

No go.Thanks though. · actions · 2006-Jan-28 11:08 pm · BillRolandPremium Memberjoin:2001-01-21Ocala, FL BillRoland Premium Member 2006-Jan-28 11:40 pm What (if any) changes have you made before this started? From a newsgroup post: "I solved the problem. Rejoin the domain, reboot.   0 Poblano OP Melman May 19, 2009 at 7:14 UTC Did all of that maybe 10 times already and nothing - deleted everything A reboot fixed it.

He was not allowed to logon the hour before midnight and only in this period the error showed up. x 4 Pavel Dzemyantsau - Error: "Not enough storage is available to complete this operation" - In my case, this error was caused by Backup Exec 10 agent memory leaks. Your cache administrator is webmaster. Reply Subscribe RELATED TOPICS: Error 1053 Windows Cannot determine the User or Computer Name Getting Event ID 40960 for a single computer Problems setting kerberos MaxTokenSize and RDS.   1 2

x 5 EventID.Net - Error: "Access is denied" (Error code 5) - See ME262958. - Error: "There are no more endpoints available from the endpoint mapper" (Error code 1753) - See x 113 Anonymous In my case this event was a result of the server pointing to an incorrect DNS server. What is the role of Userenv? Ran the standard browser wizard to join the domain, there were a few issues.The most notable being the computer configuration wizard pushing Outlook decided to run 4 days after the initial

Group Policy processing aborted.    Please help ????? Wednesday, December 12, 2012 5:38 AM Reply | Quote 0 Sign in to vote Well I've actually done this but i did not see any significant clues... An example of Our approach Comments: EventID.Net See the links to "Troubleshooting network problems" and "ADS Known Issues" for information on fixing this problem. - Error: "Not enough storage is available