Home > Windows Cannot > Userenv 1058 Windows Cannot Access The File Gpt.ini For Gpo

Userenv 1058 Windows Cannot Access The File Gpt.ini For Gpo


As this was deliberate, I changed the primary adapter and the problem was immediately resolved. In our case, there were no other permissions other than those, so these two subfolders would have been left with no permissions at all. Install UPHClean. Go to the Group Policy Management Console and attempt to edit the offending GPO. weblink

Look forward to checking out your web page for a second time. x 4 EventID.Net The following comments are applicable to this event with "Access denied" as error code for the {31B2F340-016D-11D2-945F-00C04FB984F9} group policy (Default for a domain) on a Windows 2003, SP1 The posts also indicate that the Client for Microsoft Networks and the File and Printer Sharing services have to be bound to the network adapter. Reboot the system as directed.

Windows Cannot Access The File Gpt.ini For Gpo 1058

My DC was down for about an hour total, so you'll want to make sure you have that much time. Also, if SMB signing policies are set by the default domain controller security policy, the problem affects all the domain controllers on the network. x 1 Joerg Hermanns I had this problem when I accidentally modified the permissions on the SYSVOL share, so that the client computers were not able to read the group policies

  1. x 4 Richard Righart van Gelder This error started on Monday after rebooting our SBS2003 server.
  2. Should I report it?
  3. x 113 Anonymous Above all else make sure of this, Go to Control Panel > Network connections > Advanced > Advanced settings and make sure that your internal connection has Windows
  4. I solved the problem by allowing NetBIOS traffic through the VPN tunnel.

Setting it back fixed my problem. I like what I see so now i am following you. See ME839499 to fix this problem. Dfsutil /purgemupcache Then by choosing properties on the correct GPO I checked what the trivial name ("DisplayName") was and remade that particular GPO in GPMC with pointers using dfs-paths instead.

Put in the IP address for your domain controller (the local IP address should be first in the list), and then next to the IP address do not put the host Windows Cannot Query For The List Of Group Policy Objects Server 2003 I compared the GPO-ID from event 1058 to the GPOs, and found the ID referred to the "Default Domain Policy". So in fact, the DC tries to reach a machine which isn't there. Since then, I've not had any problems".

Based on that I figured that some sort of process keeps the file locked hence the next step - I followed the suggestions on one of the posts here to flush Kb840669 In my case for some reason, the NTFS permissions on the PDC in the subdirectories of ď\WINNT\SYSVOL\Ē have lost all settings but those for Administrators. By clearing the inconsistency problems in the GPO between SYSVOL and Active Directory with the Group Policy Management Console, events 1058 and 1030 were also cleared on all Servers and Clients This should be set to 0.

Windows Cannot Query For The List Of Group Policy Objects Server 2003

Default permissions: Authenticate Users - Read & Apply Group Policy Creator Owner - Special permission Domain Admins - Full Control & Special permission Enterprise Admins - Full Control & Special permission edit - yes that's the exact article he was referncing.  Unfortunately it's not happening b/c it's coming out of standby. 0 Mace OP Martin9700 Jun 9, 2009 at Windows Cannot Access The File Gpt.ini For Gpo 1058 Therefore, Group Policy replication in the Active Directory directory service will fail, and you will not be able to edit Group Policy to undo these settings". Windows Cannot Access The File Gpt.ini For Gpo Cn= 31b2f340-016d-11d2-945f-00c04fb984f9 To install Support Tools, run \\SUPPORT\TOOLS\SUPTOOLS.MSI located on your Windows Server 2003 CD-ROM.

Changing the settings for VSE and then changing some of your GPO settings just like Mark Minasi said, will solve it. have a peek at these guys Kill the mobsync.exe process. 4. Group Policy processing aborted. English: This information is only available to subscribers. Event Id 1058 Group Policy Server 2012

As stated previously, dfsutil /PurgeMupCache also solved my problems. x 1 Private comment: Subscribers only. When I manually added NS records for the current DNS servers the 1030 & 1058 errors stopped some 6 hours later. check over here The solution turned out to involve re-installation of drivers, clients, protocols and services for the network adapters.

yourdomainname.com = the name of your domain The list would be reversed (as far as IP address) on the hosts file on the other domain controller. Kb885887 I recreated it and the errors went away after a gpupdate /force. x 71 Scott Clement In my case, the server started rejecting network traffic.

To fix this problem Iíve set the external interface to an external DNS server".

It contained only one NS record for a DNS server that no longer existed. From a newsgroup post: "I had the 1030 and 1058 errors in the event log every 5 minutes on a W2K3 domain controller that also ran DNS, DHCP, Exchange 2003 Standard, x 119 Anonymous Problem occurred with a logon/logoff script. Windows Cannot Access The File Gpt.ini For Gpo Access Is Denied x 3 Alanden Where the NetBIOS and DFS fixes don't fix the problem, a patch is available from Microsoft that does fix it.

The Access Protection Default rule set prevents remote creation of .ini files and other extensions, thus, the GPO files cannot be updated. Our server is Windows Server 2003 R2 SP2. I rebuilt the DC and was very careful with the password until I could build a new EA/SA/DomainAdmin account. http://rinfix.com/windows-cannot/userenv-windows-cannot-access-the-file-gpt-ini-for-gpo-cn.html During domain-upgrade from Windows Server 2000 to 2003, the proper ACLs are not granted on the existing GPOs.

How can I claim compensation? The file must be present at the location <\\\sysvol\\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini>. (.). x 2 Anonymous I was also receiving multiple 1030/1058 errors every 5 minutes or so. There is a workaround or a maintenance release that will fix the problem.

Specific error is: Cluster ... A data value of 1 disables the client. 3.Press OK and exit the Registry Editor. 4.Verify that File and Printer Sharing for Microsoft Networks is enabled on the interface: A.Start / Bilyk This can take place if TCP/IP NetBIOS Helper Service is turned off or set to manual startup. x 5 Andreas Czech In our case, the problem was caused by a registry entry that was missing.

x 2 Anonymous In my case, DCGPOfix.exe was able to repair this problem. Browse other questions tagged windows-server-2003 active-directory group-policy replication or ask your own question. I could view \\dcname\anyothershare but not \\dcname\sysvol. In this domain, one part of AD-integrated DNS was not up to date for reasons we have not yet determined at this writing.

Windows 2000 Server and Windows Server 2003 do not distinguish between non-ASCII and ASCII characters in account names". If your page does not automatically refresh, please follow the link below: Support Home © 2003-2016 McAfee, Inc.