Home > Windows Cannot > Userenv 1053 Windows Cannot Determine

Userenv 1053 Windows Cannot Determine


Group Policy seems to apply fine (no userenv errors) on the domain controllers and member servers. The issue turned out to be slow link detection with the domain controllers. After restart the machine issue has been resolved ..but it comes later also any idea please.. I don't see any errors related to the application jobs, however, but am having to run these job tasks manually to get them done. http://rinfix.com/windows-cannot/userenv-windows-cannot-determine-the-user-or-computer-name-1053.html

To check this, at a command prompt (Start > Run > cmd) type "ipconfig /all". In each case, the event appeared every 60 to 120 minutes (the machine’s policy update interval). I also tried gpupdate with the firewall switched off to no avail. The Q article doesn't contain the error message we are getting, but I have spoken to MS tech support, and this is the fix." x 6 Private comment: Subscribers only.

Windows Cannot Determine The User Or Computer Name Server 2003

When the Intel Pro Nic in my server came up, it did not wait for spanningtree to put the port in forwarding mode, causing errors related to the temporary disconnect. We have several applications on the machine that are working, except for one application that runs unattended jobs in Windows 2003 Server, that appears to have trouble now. Group Policy processing aborted", on Windows 2003 servers. Login.

I'm surprised the fix on the MS site didn't work. x 123 Anonymous I've got almost the same situation as described by contributor Rich Ailes. Thank you for searching on this message; your search helps us identify those areas for which we need to provide more information. Windows Cannot Determine The User Or Computer Name Access Is Denied Group Policy processing aborted.".

The problem was corrected by updating the Intel Gigabit NIC driver on the server. Windows Cannot Determine The User Or Computer Name Not Enough Storage BulkRate Ars Scholae Palatinae Registered: Sep 9, 2003Posts: 740 Posted: Thu Oct 05, 2006 9:48 am This can be caused on client machines by not having option #15 (DNS Domain Name) See WITP76098 for information on how to troubleshoot kernel-mode memory leaks. No server updates have been done...

ForumsJoin Search similar:A little help needed to configure Netgear router to work with NVG510, pleaseComcast DNS in metro AtlantaDNS - Secondary DNS Zones - Defining DNS Name Servers QuestionReddit issues[DSL] Frontier Windows Cannot Determine The User Or Computer Name 1326 Privacy Policy Site Map Support Terms of Use whatevernetworks.com Whatever Networks Blog HomeAbout « Windows 2008 - Role and Features Error Citrix Down Sessions & Multiple Instances » Userenv 1053 - That'll tell ya right away if it's a DNS problem. JRod "Exclusively cybersocial" Ars Scholae Palatinae Tribus: The great white north Registered: Jun 16, 2005Posts: 1496 Posted: Wed Oct 04, 2006 7:29 pm quote:seems to be unable to process group policy

  1. After some digging and searching I checked local services on the DC and found that the "Netlogon" services was paused - not stopped.
  2. Verify that the domain controller can be contacted through Domain Name System (DNS), try to access \\mydomain.com\sysvol\mydomain.com, where mydomain.com is the fully qualified DNS name of your domain. 3.
  3. Unfortunately I don't have the full text of the error at the moment and can't recall it off the top of my head.
  4. See ME948496 from Microsoft for more details on this issue.
  5. The cause was I had my network settings for my internal nic screwed up.
  6. In addition, the following services failed to start "Computer browser service", "Net logon Service", "Workstation Service", and "Messenger Service".

Windows Cannot Determine The User Or Computer Name Not Enough Storage

x 73 Erin Carter One of our workstations would not log onto the domain and was showing this event ID. By creating an account, you're agreeing to our Terms of Use, Privacy Policy and to receive emails from Spiceworks. Windows Cannot Determine The User Or Computer Name Server 2003 x 8 Anonymous I had this problem on a Windows 2003 Terminal Server that was a domain member. Event Id 1053 Group Policy This entry was posted by ncrancher on 04/13/2012 at 6:01 pm, and is filed under Uncategorized.

The server lost connection to the DC and all accounts in the admin group showed just as their SIDs. http://rinfix.com/windows-cannot/userenv-windows-cannot-determine.html Has anyone had a similar problem? Authenticated Users needs Read and System needs Full Control on the OU where the servers are located. This can be beneficial to other community members reading the thread. Event Id 1053 Error Code 1722

I started getting 1332 errors so I searched Google Groups with that error code and found that the error is related deleted user accounts still being referenced in some GPOs. Verify that you can access the domain controller by using tools such as the Active Directory Users and Computers snap-in. 4. Marked as answer by Nina Liu - MSFTModerator Friday, May 06, 2011 3:34 AM Thursday, April 14, 2011 9:08 AM Reply | Quote Moderator Microsoft is conducting an online survey to http://rinfix.com/windows-cannot/userenv-1053-windows-cannot-determine-the-user-or-computer.html x 6 Sebastian In my case, this event was being generated along with EventID 1110 from source Userenv.

x 5 Anonymous In my case, increasing the Kerberos Token size worked on my W2K3 standard server. Event Id 1053 Service Did Not Respond Start DNS is correct and 10 other clients are all working correctly WRT group policy, etc. This led to general unstable system behavior.


You can use the links in the Support area to determine whether any additional information might be available elsewhere. The information in the 529 event contained the reason "Unknown user name or bad password", a logon type of 3, and the logon process and authentication process set to Kerberos. First Name Please enter a first name Last Name Please enter a last name Email We will never share this with anyone. Windows Cannot Determine The User Or Computer Name The Rpc Server Is Unavailable From what I gather it is a DNS issue, so that is what I'm troubleshooting.The complete error is:Windows cannot determine the user or computer name. (Access is denied) Group Policy processing

Join & Write a Comment Already a member? Join Now For immediate help use Live now! The cause was traced to an Anti-Virus/Firewall program (AVG 7.5 Server) running on the DC. this content I tried 'gpupdate /force' and the eventid in the title appeared in the event log.

Recommend Us Quick Tip Connect to EventID.Net directly from the Microsoft Event Viewer!Instructions Customer services Contact usSupportTerms of Use Help & FAQ Sales FAQEventID.Net FAQ Advertise with us Articles Managing logsRecommended In Event Viewer, click System, and check for any networking-related messages, such as Netlogon 2. Check to see whether other computers on the network are having the same problem. 3. If it is logged on a client, please check the following factors: 1.

Add Cancel × Insert code Language Apache AppleScript Awk BASH Batchfile C C++ C# CSS ERB HTML Java JavaScript Lua ObjectiveC PHP Perl Text Powershell Python R Ruby Sass Scala SQL TekSavvy - ENOUGH IS ENOUGH ALREADY!!! [TekSavvy] by MrMazda86423. Enter the product name, event source, and event ID. Once I replaced the missing "wkssvc.dll" file by copying it from another XP (Professional) machine and rebooted all went back to normal.

AD will not work otherwise. Determine the location of the FSMO roles by lo… Windows Server 2008 Windows Server 2012 Active Directory Windows Server 2012 – Configuring NTP Servers for Time Synchronization Video by: Rodney This New computers are added to the network with the understanding that they will be taken care of by the admins. With this registry key set to 2 only administrators can log on to the DC.

The old domain was still active and accounts from that domain were listed in local groups to a computer in the new domain. I would test your DNS infrastructure by using the standard tools:dnslintdnscmdnslookupAlso, try disabling NetBIOS over TCP/IP and see if your client can still locate a domain controller. If the issue persists, please briefly describe the configuration of the group policy which failed to apply on client. Their session was still running.

Note that no Crash On Audit Fail blue screen appeared and the security event log was not full so there was no related message shown. Group Policy processing aborted.