Home > Ubuntu Cannot > Ubuntu Cannot Fixate Disk

Ubuntu Cannot Fixate Disk

As the official size of the lead-out area on the disk is 90 seconds (6750 sectors) and a disk usually works if there are at least 150 sectors of lead out, The mandatory parameter value is the laser power offset and currently may be selected from -2, -1, 0, 1, 2. Note that the image must be mirrored to be readable from the pick up side of the CD. -setdropts Set the driveropts specified by driveropts=option list, the speed of the drive noforcespeed Turn off the force speed feature. this contact form

mmc_cd_dvd The generic SCSI-3/mmc CD/DVD driver is auto-selected whenever wodim finds a MMC-2 or MMC-3 compliant drive that seems to support more than one medium type and the tray is open Operation starts.Waiting for reader process to fill input buffer ... But when I plopped the CD into my desktop, the boot never finished and the DVD player kept humming for about 45 minutes. wodim will reject any audio file that does not match the Red Book requirements of 16-bit stereo samples in PCM coding at 44100 samples/second.

Do you have any settings for your drives in fstab as I vaguely remember having to comment out the cd dvd drive settings. If your CPU is too slow, this may result in buffer underruns. Philips) need to eject the medium before creating a new disk. cuefile=filename Take all recording related information from a CDRWIN compliant CUE sheet file.

Track 01: 22 of 49 MB written (fifo 100%) [buf 100%] 2.0x. The simulation drivers implement a drive with a buffer size of 1 MB that can be changed via the CDR_SIMUL_BUFSIZE environment variable. It seems that all Sony drives (even newer ones) still implement the Sony proprietary SCSI commands so it has not yet become a problem to use this driver for all Sony Track 01: 40 of 49 MB written (fifo 100%) [buf 100%] 2.1x.

In the other write modes, the direct file to track relation may not be implemented. If an empty file is used for track data, this option may be used to create a disk that is entirely made of padding. However, the success of this method is not guaranteed since it requires an adaptation scheme for your architecture, and the numbers may vary depending on the hardware-internal numbering or on the https://bugs.launchpad.net/bugs/127146 Starting from scratch on my Fedora 12 box, I popped in a blank CD and good old Nautilus CD/DVD creator pops up: I dragged and dropped the ISO onto the blank

speed=# Set the speed factor of the writing process to #. # is an integer, representing a multiple of the audio speed. Line number 0 (radius 0) is mapped to the center of the disk. Gimp Batch chi lo U.S.A. ???GUIDA EXIF comprensibile cercasi GUIDA niubbi ubuntu facile 2012 neolinux Rampante Reduce Messaggi: 5122Iscrizione: dicembre 2008 Sito web Torna su Vai giù Mostra ultimi messaggi: The reason for the existence of the driver=name option is to allow users to use wodim with drives that are similar to supported drives but not known directly by wodim.

  1. The FIFO percent output is computed just after a block of data has been written to the CD/DVD-Recorder.
  2. K3B error message Having an Issue With Posting ?
  3. This only works with a tray loading mechanism but seems to be useful when using the Kodak disk transporter. -lock Load the media, lock the door and exit.
  4. Track 01: 4 of 49 MB written (fifo 100%) [buf 100%] 2.1x.
  5. Errno: 5 (Input/output error), flush cache scsi sendcmd: no error CDB: 35 00 00 00 00 00 00 00 00 00 Errno: 5 (Input/output error), flush cache scsi sendcmd: no error
  6. Hi floke,I tried wodim with no options just 'wodim file.iso' and here is the output....wodim: No write mode specified.wodim: Asuming -tao mode.wodim: Future versions of wodim may have different drive dependent
  7. The options are specified a comma separated list.

I use nerolinux with no problems, I know its commercial software which may bother you but it is available to try which may determine whether it's a hardware or software fault. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson. With this option, wodim will work with CD-R drives and with CD- ROM drives. -atip Retrieve and print out the ATIP (absolute Time in Pre-groove) info of a CD/DVD recordable or yamaha_cdr100 The driver for Yamaha CDR-100 / CDR-102 is auto-selected when wodim finds one of the old pre MMC CD writers from Yamaha.

On other systems, you should run genisoimage at no less than nice --18. weblink Offline #18 2009-03-20 03:05:50 vader Member Registered: 2008-12-10 Posts: 5 Re: [SOLVED]Why can't I burn cd/dvd discs? The Sony drives have no hardware support for CD-ROM XA mode 2 form 1. Use with care.

Fixating time: 22.123s wodim: fifo had 11331 puts and 11331 gets. Reply With Quote 12-08-2009 #5 reed9 View Profile View Forum Posts Private Message View Articles Linux Guru Join Date Feb 2009 Location Boston, MA Posts 4,651 Originally Posted by Skinny-Mini You This may e.g. navigate here wodim implements several checks that prevent you from doing unwanted things like damaging CD-RW media by improper drives.

The file must be a file with raw image B&W data (one byte per pixel) in a size as retrieved by a previous call to tattoofile=name . Track 01: 13 of 49 MB written (fifo 100%) [buf 100%] 2.1x. wodim: Asuming -tao mode.

index: 3 Manufacturer: CMC Magnetics CorporationBlocks total: 359846 Blocks current: 359846 Blocks remaining: 8612 Speed set to 8468 KB/s Starting to write CD/DVD at speed 48.0 in dummy TAO mode for

Only one track may be taken from stdin. When creating a disc with both audio and data tracks, the data should be on track 1 otherwise you should create a CDplus disk which is a multi session disk with wodim does not support Session At Once recording with these drives. Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 1053696 = 1029 KB Beginning DMA speed test.

I have 2 Sony DVD-RW (DUAL LAYER) , and 2 CDRWs (samsung & LG). Current: 0x0009 (CD-R) Profile: 0x0012 (DVD-RAM) Profile: 0x0011 (DVD-R sequential recording)Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Watch the latest videos on YouTube.com Blog Archive ► 2016 (1) ► May (1) ► 2015 (1) ► February (1) ► 2013 (4) ► April (1) ► March (2) ► February his comment is here The third line gives information on the SCSI status code returned by the command, if the transport of the command succeeds.

The file with track data should contain an ISO-9660 or Rock Ridge filesystem image (see genisoimage for more details). Check that you are a member of the cdrom group Code: cat /etc/group | grep cdrom If not Code: sudo gpasswd -a cdrom Where is your username. Note that wodim needs to know the size of each track in advance for this mode (see the genisoimage -print-size option and the EXAMPLES section for more information). -tao Set TAO mcn=med_cat_nr Set the Media Catalog Number of the CD to med_cat_nr. -text Write CD-Text information based on information taken from a file that contains ascii information for the text strings.

Use this option with extreme care. A typical line may look this way: plex760= 0,5,0 12 50m varirec=1 pioneer= /dev/hdd -1 -1 This tells wodim that a drive named plex760 is at scsibus 0, target 5, lun Many CD recorders have bugs and often require a firmware update to work correctly. fs=# Set the FIFO (ring buffer) size to #.

Track 01: 37 of 49 MB written (fifo 100%) [buf 100%] 2.1x. On old and small machines, you need to be more careful with the FIFO size. I have to burn DVDs.Look at this:http://mso-chronicles.blogspot.com/2008 … ora-9.html Last edited by thunderogg (2008-11-14 22:48:58) Offline #6 2008-11-15 13:21:02 diesel1 Arch Linux [email protected] Team Member From: Leeds, UK. If you write smaller tracks, the CD-Recorder will add dummy blocks.

Register. 12-02-2009 #1 Skinny-Mini View Profile View Forum Posts Private Message View Articles Just Joined! CDR_SPEED Sets the default speed value for writing (see also speed= option). Report a bug This report contains Public information Edit Everyone can see this information. Join Date Oct 2009 Location That one place in that one state in that one country in that one continent in that one hemisphere.

all Blank the entire disk. pktsize=# Set the packet size to #, forces fixed packet mode. For now, the device will be mapped to a block device file where possible.Run "wodim --devices" for details. You need to enable Single Session mode before you insert the defective disk!

Another funny thing is that the same dvd writer can't read the dvdrw disc burned by itself and the same disc is working well in the other drive!Really I disturbed by