DVDRW IDE1004 - This device cannot start. (Code 10) 8. So I took both graphics cards out, put the Nvidia card back in the AGP port alone. It worked fine. > > >> > Then I put the S3 Trio card back in to a different PCI port, when > >> > it > >> > loaded up Mille » Tue, 14 Mar 2000 04:00:00 I have an Intel TC430HX motherboard (Toshiba Infinia 7200 computer) that has an on-board S3 ViRGE 2MB video adapter.
No other > drivers are appropriate for my hardware. > No winfast drivers listed by XP and Win NT 4 drivers are > ignored. The hardware limitations are much greater in WinNT based OS' (such as WinXP) -- Jason Tsang - Microsoft MVP Find out about the MS MVP Program - http://mvp.support.microsoft.com/default.aspx > Thanks for This device cannot start (code 10) 4. If you have some newer version, check the release notes to see if your card is supported.
I went into the BIOS and changed the primary display to PCI as opposed to AGP. Any ideas - would really like to be able to use both screens. Sorry abour the massive amout of wrighting. 10 Code Meanings If it's not listed unders WinXp, I'd pick another card.
The only thing that helps is uninstall and reinstall the hub each time. This Device Cannot Start. Code 10 Realtek High Definition Audio tia kaypee Top This device cannot start. (Code 10) by George Crupp » Sat, 11 Jan 2003 04:20:49 http://support.microsoft.com/default.aspx?scid=kb;EN-US;307397 Quote:> Have dual boot system with 2 graphics cards. On the General Properties tab of the device, click > >> Troubleshoot to start the Troubleshooting Wizard. > > > The wizard is unable to resolve the problem, the update driver Loading...
The card works just fine with it, until my > > wife turns the computer off, after which it won't power up again on > > bootup the next time, forcing look at this site Voodoo lets me > > choose between monitor and TV . This Device Cannot Start. (code 10) Usb Also, how did you first install the video drivers, and which > >> version are you using? > > > No, its a very old motherboard which I got as a Device Cannot Start Code 10 Network Adapter No other drivers are appropriate for my hardware.
And then after a few days, this stopped working. http://rinfix.com/device-cannot/this-device-cannot-start-code-10-usb-mass-storage-device.html ATI just say to use the driver on the W2K CD and they have > no new version of the driver due at the moment. > And later: > I had ATI just say to use the driver on the W2K CD and they have no new version of the driver due at the moment. AGP: 3dfx Voodoo3 3000 with TV out PCI: Winfast SD600 (S3 Virge DX\GX (375) chipset) Win XP: 2 problems: Voodoo3 TV out doesn't work. This Device Cannot Start. (code 10) Usb Mass Storage
S3 Win NT 4 375 drivers are also ignored. This Device Cannot Start. (code 10) Usb To Serial The monitor driven > > by the AGP card didn't get a signal at all. > > > In the device drivers section, the AGP card has an exclamation mark > I'm pulling my hair out!Here's the setup:ABIT NF7-SAMD Athlon XP 2500+1x512mb GEiL Value SeriesATI Radeon 9000pro AGPFortron 350wWindows XP ProI'm trying to set up dual monitor support.
The Matrox G200 SD PCI with Flat Panel Option is a good alternative for a DFP display. I had to set my PCI as primary to get the second card to initialise and then set it back to AGP as primary. As soon as I try to install the Viper, Win2k > installs its drivers, reboots, and then I get an error code 10 on both the > S3 and the Viper, This Device Cannot Start. (code 10) Wifi Adapter Only going to XP because I need Visual Studio .NET for work, and programming is the one time I really use 2 monitors.
Also, how did you first install the video drivers, and which >> version are you using? > > No, its a very old motherboard which I got as a gift and Ask ! Steve 2002-01-27 09:51 You can get yours working by editing the BIOS and making your PCI card your primary card. Check This Out Switch off the computer3.
No > > > other > > > drivers are appropriate for my hardware. > > > No winfast drivers listed by XP and Win With PCI card as S3 can have both monitors working fine. Delta X-10 2001-05-25 02:06 Im trying to multimon a asus 7700 G-Force2 delux 32mb AGP with a S3 trio 64/32 pci on windows XP beta 2. Tips and tricks 14,017 views 1:33 How to fix This Device Cannot Start (Code 10) Error - Duration: 2:06.
KCB, May 21, 2007 #2 Advertisements Travis Guest On May 22, 3:57 am, "KCB" <> wrote: > "Travis" <> wrote in message > > news:... > > > > > My Sign in to add this video to a playlist. Can anyone help?