Home > Cannot Open > Ubuntu 11.10 Alsamixer Cannot Open Mixer

Ubuntu 11.10 Alsamixer Cannot Open Mixer


sudo apt-get install gnome-alsamixer 4.I'm not sure whether this is really necessary but just to make sure, again reboot your PC so the configuration is updated. 5. sudo -E wget -output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_rel… -cs).list && sudo apt-get -quiet update && sudo apt-get -yes -quiet -allow-unauthenticated install medibuntu-keyring && sudo apt-get -quiet update Then the next one. But, in any event, one thing I had noticed with some media players is that even when I was able to choose the ALSA driver there seemed to be some preprocessing Gayan September 6, 2012 at 3:46 pm Joshua, Please red the answer below (I had to move my comment there because there's little space remaining in this 'nested' comment area :). this contact form

Af (Reinstall ALSA safely) Run this command: [ ! -f './purgeconfig.sh' ] && wget http://purgeconfig.sf.net/ purgeconfig.sh && sudo bash ./purgeconfig.sh alsa=base alsa-utils linux-sound-base libasound2 WARNING: DO NOT RUN SYNAPTIC/APT/APTITUDE/DPKG/SOFTWARE CENTER WHILE I have been away from Linux audio for a while. Bb (Enable MIDI) WARNING: This procedure is experimental and not for inexperienced Ubuntu users Make sure that you have a MIDI port (either one of the two) on your sound card. i am using a logitech usb headset that worked fine previously with pulseaudio.

Cannot Open Mixer: No Such File Or Directory Ubuntu

Have been working for days to try and figure this out. No idea what to do for mixer element "Mono Mux"! ** (gnome-alsamixer:4645): WARNING **: gam_toggle_get_state (). As said before, for various reasons I have to disable the audio amplification otherwise the audio is muted. So I've been trying variants of Linux for the past few months, with mixed results.

  1. As it now, it's my second time that I reinstall back ubuntu 12.04.1 (the latest one LTS that I got from ubuntu sites).
  2. Well, it's certainly powerful, but I've had my fair share of issues with it :/ … Anyhow, in my case, I suspect that it's this, the bad communication between ALSA ->
  3. So most of the time I end up no sound outputs at all.
  4. To change the sound card you are working on, press F6.
  5. Try it free!
  6. ALSA uses a software mixer that resamples to 48K by default (PulseAudio uses the 44.1K) and perhaps this mismatch might be the reason that makes you say that ALSA is up
  7. Now simply add '#' before that option or you can just delete only that line and replace it with the below one (only delete that line!). #options snd-usb-audio index=-2 Then simply

would really appreaciate any advice guys thanks Gayan December 6, 2013 at 12:01 pm | Reply Try installing ‘QasMixer' (see the below instructions) … http://www.hecticgeek.com/2012/09/qasmixer-adds-a-system-tray-icon-and-a-mixer-for-alsa-ubuntu/ peter February 4, 2014 at 2:01 All the rest works fine. Now under 'Volume mute', you'll see its shortcut is listed as 'Audio mute' to the right edge of the window (it might change according to your keyboard type) Now simply click Alsamixer Cannot Open Mixer Invalid Argument But i have an issue.

make d. What I would like to know is, if by removing Pulse, I will not cause problems with the other setups in regards to Jack (and his brothers) on my system? Has anyone had this problem before? On Sat, Dec 31, 2011 at 04:10, Carsten Haitzler wrote: > ?

How to prove that authentication system works, and that the customer is using the wrong password? Amixer: Mixer Attach Default Error: No Such File Or Directory After trying, among others, to recompile everything and uninstall pulseaudio, I think that the problem lies in dbus. So if you too not getting any audio outputs after say running Totem for instance, then simply open your Terminal window and enter the below command. Anyway, just let me know what happened.

Cannot Open Mixer No Such File Or Directory Raspberry Pi

Neo June 16, 2012 at 11:27 pm | Reply I did this just to check if it made any improvement in my sound quality. https://help.ubuntu.com/community/SoundTroubleshootingGuide Then use all those values (there should be like 5 values at least) to fill out the configuration files in Ubuntu Studio 12.10 as described in that thread. Cannot Open Mixer: No Such File Or Directory Ubuntu I was going to either buy a Chromebook, or just have to make do with no sound (on top of choppy video; I do want to use the netbook for productivity Alsamixer Cannot Open Mixer Ubuntu Ludovic Chane Won In (ludochane) said on 2012-02-23: #4 humm, what do you mean by make and model?

Danny June 30, 2012 at 9:28 pm | Reply … im left with nothing alsa wont work only the test sounds works pulse audio did not work and alsa does not weblink If all you want is to set your keyboard keys to up/down and mute/unmute the master volume, then follow the below steps. 1. sudo apt-get autoremove pulseaudio 2. First of all, the image URL does not work, so I cannot see the settings etc. Add User To Audio Group

Re: [e-users] Sound problems in 65643 From: Carsten Haitzler (The Rasterman) - 2011-12-31 13:05:33 On Sat, 31 Dec 2011 04:56:15 -0800 Nikolaos Strikos said: pulse audio is a separate Dave September 6, 2012 at 3:26 am | Reply My ubuntu 12.04 server/desktop wouldn't run my asus xonar dx card until I followed your simple steps. Re: [e-users] Sound problems in 65643 From: Nikolaos Strikos - 2011-12-31 12:56:22 I fixed it by adding my account to the audio & pulse-access groups. navigate here I have reported the bug, but it could take some time before they can resolve it, as I am sure they are quite busy with bugs, that troubles more people than

I have an amplifier on my system so left External Amplification ticked… It may be worth pointing out that some users may actually want this in your tutorial. Raspberry Pi No Soundcards Found sudo apt-get autoremove ubuntu-sounds Then reboot your PC. The last step of the instructions states that the machine shall be rebooted to finish the installation.

This might not fix your issue, but it sometimes does help.

Thank you. Here if you are using Ubuntu 11.04 Classic or below. No idea what to do for mixer element "Mute-LED Mode"! Amixer: Control Default Open Error: No Such File Or Directory My 12.04 system works great now after deleting Pulse and adding ALSA.

Gayan August 29, 2012 at 7:34 pm | Reply lol! :D. I was not expecting such an error to be caused by insufficient privileges. Some sound system specific GStreamer packages may be missing. http://rinfix.com/cannot-open/ubuntu-alsamixer-cannot-open-mixer-no-such-file-or-directory.html Joshua August 29, 2012 at 12:41 pm | Reply Dude you are the man!

Well, that's pretty much it. Now from you left, navigate to: ‘org’ -> ‘gnome’ -> ‘settings-deamon’ -> ‘plugins’ -> ‘power’ 4. When I open gnome-alsamixer, I get an empty window. cat: /tmp/alsa-info.2TTFwQhuPf/alsactl.tmp: No such file or directory upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.60 !!################################ !!Script ran on: Thu Feb 23 20:27:00 UTC 2012 !!Linux Distribution !!------------------ Ubuntu 11.10 \n \l

Also, pulseaudio work ok for me. Run: grep "eld_valid *1" /proc/asound/NVidia/eld*You should see something like this: /proc/asound/NVidia/eld#X.0:eld_valid 1X is a number between 0 and 3, now remember the 'eld#X.0' number. I tried reinstalling alsa, reinstalling pulse audio, and about everything else-even reinserted the card. reni November 25, 2014 at 7:58 pm | Reply Hey guys thanks for this guide.

With Citrix VDI-in-a-Box, you don't need a complex > infrastructure or vast IT resources to deliver seamless, secure access to > virtual desktops. No idea what to do for mixer element "Mic Jack Mode"! ** (gnome-alsamixer:4645): WARNING **: gam_toggle_get_state ().